SymetrixAudio EquipmentSKU xIO AVoIP DSP Audio Expanders
Symetrix xIO AVoIP DSP Audio Expanders Series
The Symetrix xIO AVoIP DSP Audio Expanders series includes models like xIn 4, xIn 12, xOut 4, xOut 12, xIO 4x4, and xIO Stage 4x4. These 1/2 rack units enhance system analog I/O and Dante connectivity for compatible D100, Radius NX, Prism, or Edge AVoIP DSPs. Procure.ae supplies this series in the UAE with quotation-based pricing.
These audio expanders operate at 48 kHz with a frequency response of 20 Hz to 20 kHz ± 0.5 dB. Latency is 1.92 mS from input to output, including 1 mS Dante latency. Analog input dynamic range exceeds 116 dB A-weighted, while channel separation for both A/D and D/A conversion is greater than 111 dB at +24 dBu. Microphone pre-amp gain options are 0, 12, 24, 44, or 54 dB with EIN below -125 dB.
Connectivity uses the Dante protocol over standard CAT6 cables up to 100 m. Units draw power via PoE IEEE 802.3af Class 0 at 10 Watts maximum. The xIn 12 and xOut 12 models feature a secondary Gigabit Ethernet port for redundancy, while others offer single cable connectivity. Daisy-chaining allows up to 10 units with external switches. Setup is managed via Composer software.
Type
xIO AVoIP DSP Audio Expander
- Audio Performance
- Low Latency Design
- High Dynamic Range
Delivery across UAE & GCCDubai, Abu Dhabi, Sharjah & beyond
Manufacturer warrantyBacked by the brand
InstallationArranged on request
Key features
01
Audio Performance
Frequency response ranges from 20 Hz to 20 kHz ± 0.5 dB at 48 kHz sampling rate.
02
Low Latency Design
Total latency is 1.92 mS input to output, with 1 mS Dante network latency.
03
High Dynamic Range
Analog input dynamic range exceeds 116 dB A-weighted with channel separation > 111 dB.
04
PoE Connectivity
Powered via PoE IEEE 802.3af Class 0, eliminating the need for local power supplies in xIn/xOut 4 models.
05
Network Flexibility
Supports daisy-chaining up to 10 units and includes redundancy ports on xIn/xOut 12 models.
Specifications
18 specificationsGeneral
CompatibilityD100, Radius NX, Prism, Edge AVoIP DSPs
ModelxIO AVoIP DSP Audio Expanders
TypexIO AVoIP DSP Audio Expander
Audio
Channels4 or 12 channel Dante transmit (model dependent)
Dynamic Range> 116 dB A-weighted (analog input)
Frequency Response20 Hz – 20 kHz ± 0.5 dB
Impedance8k Ohms balanced, 4k Ohms unbalanced
Phantom Power+48 VDC (xIn 12 models)
SensitivityAnalog mic pre-amp EIN < -125dB (150 ohm source)
THD< -100 dB unweighted @ 1 kHz +16 dBu
Connectivity
Cable StandardStandard CAT6, max device-to-device length 100 m
ConnectivityDante protocol over standard IT networks
Connector TypeFemale Neutrik metal body DL series XLR
Input VoltageNo line voltage switching required (100-250 VAC)
PoEIEEE 802.3af Class 0, 10 Watts maximum
Physical
Form Factor1/2 Rack Form Factor
Compliance
CertificationsUL 60065, cUL 60065, IEC 60065, FCC 15.109/107, EN 55032
Additional specifications
Part numbers in this rangexIn 4, xIn 12, xOut 4, xOut 12, xIO 4x4, xIO Stage 4x4
Questions
Can’t find your answer? Ask on WhatsApp
What is the maximum latency of the Symetrix xIO AVoIP expanders?
The total latency is 1.92 mS from input to output, which includes 1 mS of Dante network latency.
Which Symetrix DSPs are compatible with these expanders?
These units work with D100, Radius NX, Prism, and Edge AVoIP DSP platforms.
Do the xIn 4 and xOut 4 models require external power?
No, they use single cable connectivity powered by PoE IEEE 802.3af Class 0, so no external power is needed.
Can I buy the Symetrix xIO AVoIP DSP Audio Expanders in the UAE?
Request a quote via WhatsApp +971 4 546 5041 or email info@procure.ae.
