Symetrix xIO AVoIP DSP Audio Expanders Series

The Symetrix xIO AVoIP DSP Audio Expanders series includes models like xIn 4, xIn 12, xOut 4, xOut 12, xIO 4x4, and xIO Stage 4x4. These 1/2 rack units enhance system analog I/O and Dante connectivity for compatible D100, Radius NX, Prism, or Edge AVoIP DSPs. Procure.ae supplies this series in the UAE with quotation-based pricing.

These audio expanders operate at 48 kHz with a frequency response of 20 Hz to 20 kHz ± 0.5 dB. Latency is 1.92 mS from input to output, including 1 mS Dante latency. Analog input dynamic range exceeds 116 dB A-weighted, while channel separation for both A/D and D/A conversion is greater than 111 dB at +24 dBu. Microphone pre-amp gain options are 0, 12, 24, 44, or 54 dB with EIN below -125 dB.

Connectivity uses the Dante protocol over standard CAT6 cables up to 100 m. Units draw power via PoE IEEE 802.3af Class 0 at 10 Watts maximum. The xIn 12 and xOut 12 models feature a secondary Gigabit Ethernet port for redundancy, while others offer single cable connectivity. Daisy-chaining allows up to 10 units with external switches. Setup is managed via Composer software.

Type

xIO AVoIP DSP Audio Expander

Key features

Audio Performance

Frequency response ranges from 20 Hz to 20 kHz ± 0.5 dB at 48 kHz sampling rate.

Low Latency Design

Total latency is 1.92 mS input to output, with 1 mS Dante network latency.

High Dynamic Range

Analog input dynamic range exceeds 116 dB A-weighted with channel separation > 111 dB.

PoE Connectivity

Powered via PoE IEEE 802.3af Class 0, eliminating the need for local power supplies in xIn/xOut 4 models.

Network Flexibility

Supports daisy-chaining up to 10 units and includes redundancy ports on xIn/xOut 12 models.

Specifications

General
Compatibility	D100, Radius NX, Prism, Edge AVoIP DSPs
Model	xIO AVoIP DSP Audio Expanders
Type	xIO AVoIP DSP Audio Expander

Audio
Channels	4 or 12 channel Dante transmit (model dependent)
Dynamic Range	> 116 dB A-weighted (analog input)
Frequency Response	20 Hz – 20 kHz ± 0.5 dB
Impedance	8k Ohms balanced, 4k Ohms unbalanced
Phantom Power	+48 VDC (xIn 12 models)
Sensitivity	Analog mic pre-amp EIN < -125dB (150 ohm source)
THD	< -100 dB unweighted @ 1 kHz +16 dBu

Connectivity
Cable Standard	Standard CAT6, max device-to-device length 100 m
Connectivity	Dante protocol over standard IT networks
Connector Type	Female Neutrik metal body DL series XLR
Input Voltage	No line voltage switching required (100-250 VAC)
PoE	IEEE 802.3af Class 0, 10 Watts maximum

Physical
Form Factor	1/2 Rack Form Factor

Compliance
Certifications	UL 60065, cUL 60065, IEC 60065, FCC 15.109/107, EN 55032

Additional specifications
Part numbers in this range	xIn 4, xIn 12, xOut 4, xOut 12, xIO 4x4, xIO Stage 4x4

QR code to Symetrix xIO AVoIP DSP Audio Expanders Series on procure.ae

Get our best price for this product

Scan to open it on procure.ae, or contact the Procure sales team:
☎ +971 4 546 5041 · WhatsApp · ✉ info@procure.ae · 🔗 View product page

This sheet is compiled from the product data held on procure.ae. For fully accurate and up-to-date figures, always refer to the manufacturer’s own specification sheet or datasheet for this model.

Specifications are provided by the manufacturer and may change without notice.

Pricing is quote-based. Contact Procure for current pricing and availability.

Delivery across the UAE and beyond, installation on request and manufacturer-backed warranty.