InFocus
Meeting Room SolutionsSKU INF-WALLMNT1
InFocus Medium Flat Panel Wall Mount – INF-WALLMNT1
The InFocus INF-WALLMNT1 (also referenced as MTA1U) is a medium flat panel wall mount with tilt adjustment. It carries up to 56.7 kg (125 lbs) of combined components and accessories and tilts from -2° to 12°. Procure.ae can quote it and confirm availability in the UAE.
Two interface brackets fix to the back of the display and hang on a top rail, then latch to a lower rail using pull cords. The tilt angle can be locked at 0°, 6° or 12° with a carriage bolt and hex nut on each bracket. The wall brackets move 1 inch (25.4 mm) side to side, and the brackets can slide along the rails. The screen first installs in a service mode that gives easy access to cables.
The mount is designed for a bare 8 inch concrete or 8 x 8 x 16 inch concrete block wall, or a 2 x 4 inch wood stud wall at 16 inches on centre covered by drywall up to 5/8 inch thick. Set screws can lock the brackets to the rails, and a padlock (not included, shackle up to 7.9 mm) can be added. The mount is for indoor use only.
Lock Type
Set screws on interface brackets; o...
Type
Medium Flat Panel Wall Mount
- Tilt adjustment
- Tilt locking
- 56.7 kg rating
Delivery across UAE & GCCDubai, Abu Dhabi, Sharjah & beyond
Manufacturer warrantyBacked by the brand
InstallationArranged on request
Key features
01
Tilt adjustment
Tilts from -2° to 12° using the interface bracket knobs.
02
Tilt locking
Locks at 0°, 6° or 12° with a carriage bolt and hex nut.
03
56.7 kg rating
Combined weight of components and accessories must not exceed 125 lbs (56.7 kg).
04
Side-to-side adjustment
Wall brackets move 1 inch (25.4 mm) horizontally.
05
Rail-and-latch fitting
Brackets hang on the top rail and latch to the lower rail.
06
Security options
Set screws lock the brackets, with an optional padlock point.
Specifications
9 specificationsGeneral
Key FeaturesTilt -2° to 12°, Tilt locking at 0°, 6°, 12°, Horizontal adjustment, Sliding interface brackets, Pull cords with magnets, Service mode for cable access, Optional padlock point
ModelINF-WALLMNT1
TypeMedium Flat Panel Wall Mount
Physical
AdjustabilityTilt and horizontal adjustment (25.4 mm)
Load Capacity56.7 kg (all components and accessories)
Lock TypeSet screws on interface brackets; optional padlock (shackle up to 7.9 mm)
MountingInterface brackets hang on a top rail and latch to a lower rail
Tilt-2° to 12°, lockable at 0°, 6° and 12°
Wall FixingBare 8 in concrete or 8 x 8 x 16 in block; 2 x 4 in wood studs at 16 in centres with drywall up to 5/8 in
Downloads
Manufacturer documents for the InFocus Medium Flat Panel Wall Mount – INF-WALLMNT1 — datasheets, manuals, drawings and certificates.
Questions
Can’t find your answer? Ask on WhatsApp
What weight can the InFocus INF-WALLMNT1 support?
The combined weight of all components and accessories attached to the mount must not exceed 125 lbs (56.7 kg). The installation instructions describe it as a medium flat panel mount.
How much tilt does the INF-WALLMNT1 offer?
The interface brackets allow tilt from -2° to 12°. The angle can be locked at 0°, 6° or 12° using one 1/4-20 x 1 inch carriage bolt and one hex nut per interface bracket.
What walls can the INF-WALLMNT1 be fixed to?
It is designed for a bare 8 inch concrete wall or 8 x 8 x 16 inch concrete block wall, or a 2 x 4 inch wood stud wall with studs 16 inches on centre and drywall up to 5/8 inch thick.
Can I buy the INF-WALLMNT1 in the UAE?
Request a quote via WhatsApp +971 4 546 5041 or email info@procure.ae.
