InFocus Medium Flat Panel Wall Mount – INF-WALLMNT1

The InFocus INF-WALLMNT1 (also referenced as MTA1U) is a medium flat panel wall mount with tilt adjustment. It carries up to 56.7 kg (125 lbs) of combined components and accessories and tilts from -2° to 12°. Procure.ae can quote it and confirm availability in the UAE.

Two interface brackets fix to the back of the display and hang on a top rail, then latch to a lower rail using pull cords. The tilt angle can be locked at 0°, 6° or 12° with a carriage bolt and hex nut on each bracket. The wall brackets move 1 inch (25.4 mm) side to side, and the brackets can slide along the rails. The screen first installs in a service mode that gives easy access to cables.

The mount is designed for a bare 8 inch concrete or 8 x 8 x 16 inch concrete block wall, or a 2 x 4 inch wood stud wall at 16 inches on centre covered by drywall up to 5/8 inch thick. Set screws can lock the brackets to the rails, and a padlock (not included, shackle up to 7.9 mm) can be added. The mount is for indoor use only.

Lock Type

Set screws on interface brackets; optional padlock (shackle up to 7.9 mm)

Type

Medium Flat Panel Wall Mount

Key features

Tilt adjustment

Tilts from -2° to 12° using the interface bracket knobs.

Tilt locking

Locks at 0°, 6° or 12° with a carriage bolt and hex nut.

56.7 kg rating

Combined weight of components and accessories must not exceed 125 lbs (56.7 kg).

Side-to-side adjustment

Wall brackets move 1 inch (25.4 mm) horizontally.

Rail-and-latch fitting

Brackets hang on the top rail and latch to the lower rail.

Security options

Set screws lock the brackets, with an optional padlock point.

Specifications

General
Key Features	Tilt -2° to 12°, Tilt locking at 0°, 6°, 12°, Horizontal adjustment, Sliding interface brackets, Pull cords with magnets, Service mode for cable access, Optional padlock point
Model	INF-WALLMNT1
Type	Medium Flat Panel Wall Mount

Physical
Adjustability	Tilt and horizontal adjustment (25.4 mm)
Load Capacity	56.7 kg (all components and accessories)
Lock Type	Set screws on interface brackets; optional padlock (shackle up to 7.9 mm)
Mounting	Interface brackets hang on a top rail and latch to a lower rail
Tilt	-2° to 12°, lockable at 0°, 6° and 12°
Wall Fixing	Bare 8 in concrete or 8 x 8 x 16 in block; 2 x 4 in wood studs at 16 in centres with drywall up to 5/8 in

QR code to InFocus Medium Flat Panel Wall Mount – INF-WALLMNT1 on procure.ae

Get our best price for this product

Scan to open it on procure.ae, or contact the Procure sales team:
☎ +971 4 546 5041 · WhatsApp · ✉ info@procure.ae · 🔗 View product page

This sheet is compiled from the product data held on procure.ae. For fully accurate and up-to-date figures, always refer to the manufacturer’s own specification sheet or datasheet for this model.

Specifications are provided by the manufacturer and may change without notice.

Pricing is quote-based. Contact Procure for current pricing and availability.

Delivery across the UAE and beyond, installation on request and manufacturer-backed warranty.