VSYS VSVW02-46T Push-Pull Pop-Out Video Wall Mount for 37"–70" Displays, 45 kg

The VSYS VSVW02-46T is a push-pull pop-out video wall mount for 37"–70" displays weighing up to 45 kg, available in the UAE from Procure.ae.

In a tiled array the screens sit almost edge to edge, which leaves an installer no room to reach a HDMI lead or a failed power brick. The VSVW02-46T solves that with a sprung pop-out carriage: press the panel face and it releases forward, clear of its neighbours, so the rear of the display can be worked on in place. Push it back and the quick-lock holds it at a 68 mm retracted depth, tight enough for signage walls and lobby arrays.

The pop-out travel is 215 mm, measured from the wall face to the display at full extension. Alignment is done on the bracket rather than the wall: lateral shift adjusters slide each panel sideways to close bezel gaps, a levelling adjustment squares the screen against its neighbours, and a toolless tilt of plus or minus 3 degrees fine-tunes the plane of the array. The arms are 2 mm to 2.5 mm cold-rolled steel with a black powder-coated finish, and accept VESA patterns from 200 x 200 mm to 600 x 400 mm.

It is supplied to corporate, education, hospitality and government organisations across the UAE, with procurement-ready quotations and regional delivery.