Panasonic Large-Venue Projector PT-RQ13K

  • SKU: PT-RQ13K

Actual Stock Can Be Confirmed After Placing the Order.

Specification PT-RQ13K Power supply 100–240 V AC, 50/60 Hz Power consumption*1 1,270 W (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal);Average power consumption: 913 W (Normal Mode), 782 W (Eco Mode), 531–732 W (Long Life 1... See More

Whatsapp Us
TELEPHONE (+971) 454 65041
WHATSAPP (+971) 454 65041
FREE SHIPPING All orders over AED1999/-

Specification


PT-RQ13K

Power supply 100–240 V AC, 50/60 Hz
Power consumption*1 1,270 W (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal);
Average power consumption: 913 W (Normal Mode), 782 W (Eco Mode), 531–732 W (Long Life 1 Mode), 477–702 W (Long Life 2 Mode),423–665 W (Long Life 3 Mode) [Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft), ICE627087: 2008 Broadcast content, Picture Mode: Dynamic, Dynamic Contrast Mode: 3]
DLP™ chip
Panel size 22.9 mm (0.9˝)
diagonal (16:10 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Pixels 4,096,000 (2560 x 1600) x 3, total of 12,288,000 pixels when Quad Pixel Drive set to OFF, 49152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON
Refresh rate 240 Hz*2
Lens Optional (no lens included with this model)
Light source Laser diode (Class 1) (Class 3R for US models),
Light-source life*3:
20,000 hours (Normal Mode),
24,000 hours (Eco Mode)
Screen size (diagonal) 1.78–25.4 m (70–1,000˝),
1.78–15.24 m (70–600˝) with ET-D75LE8,
3.05–15.24 m (120–600˝) with ET-D75LE90,
16:10 aspect ratio
Brightness*4 10,000 lm
Contrast*4 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)
Resolution 5120 x 3200 pixels (Quad Pixel Drive: ON)
Supported RGB signal XGA–WUXGA
Supported video signal NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i, 4K
Keystone correction range*6 Vertical: ±40° (±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90)
Keystone correction range with optional Upgrade Kit ET-UK20*6 Vertical: ±45° (±40° with ET-D75LE10/D75LE20, ±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±40° (±15° with ET-D75LE6/D75LE10/D75LE50, ±20° with ET-D75LE20, ±25° with ET-D75LE30, ±30° with ET-D75LE40, ±40° with ET-D75LE8, 0° with ET-D75LE90), Up to a total of ±30° during simultaneous horizontal and vertical correction.
Installation Ceiling/floor, front /rear, free 360-degree installation
Cabinet materials Molded plastic
Dimensions (W x H x D) 578 x 270 x 725 mm (22 3/4˝ x 10 5/8˝ x 28 17/32˝) (optional lens, legs and lens cover not included); 578 x 323.5 x 740 mm (22 3/4˝ x 12 23/32˝ x 29 1/8˝) (Including legs at shortest position and protruding parts)
Weight*7 Approx. 49.0 kg (108 lbs) (optional lens not included)
Operation noise*4 46 dB
Operating environment Operating temperature: 0–45 °C (32–113 °F)*8,
operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software,
Multi Monitoring & Control Software,
Early Warning Software,
Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10*9 Auto Screen Adjustment Kit)

No datasheet available.

Call WhatsApp