VSYS VS02E-443 Economical Full-Motion TV Wall Mount for 23"–65" Displays, 30 kg
- Model: VS02E-443
- SKU: VS02E-443
Actual Stock & Price Can Be Confirmed After Placing the Order.
The VSYS VS02E-443 is an economical full-motion wall mount for 23"–65" flat and curved displays weighing up to 30 kg, available in the UAE from Procure.ae. Small and mid-size screens are usually asked to serve more than one seating position. A monitor on a... See More
The VSYS VS02E-443 is an economical full-motion wall mount for 23"–65" flat and curved displays weighing up to 30 kg, available in the UAE from Procure.ae.
Small and mid-size screens are usually asked to serve more than one seating position. A monitor on a huddle-room wall has to face both ends of the table; a counter display has to turn toward whoever is standing at it. A fixed bracket cannot do that, and a heavy-duty articulating arm is overspecified for a 30 kg panel. The VS02E-443 sits in that gap, with a folding steel arm load-tested to three times its rated capacity.
Retracted, the arm folds the display to 60mm from the wall, close enough to read as a flush installation. Extended, it reaches 382mm, then tilts from plus 3 to minus 10 degrees and swivels a full 90 degrees to either side. The plate fixes to a single stud or a solid wall, VESA patterns from 100x100mm to 400x400mm are accepted, and cable clips run along the arm so HDMI and power leads follow the movement instead of snagging on it.
It is supplied to corporate, education, hospitality and government organisations across the UAE, with procurement-ready quotations and regional delivery.
Key Features
- Swivels plus 90 to minus 90 degrees, so one screen can serve viewers on either side of a room or counter.
- Tilt range of plus 3 to minus 10 degrees for correcting glare from windows and ceiling lighting.
- Folds to 60mm wall clearance when not in use and extends to 382mm when the screen needs to come forward.
- Rated for 30 kg and strength-tested to three times that load, which suits the panel weights typical of 23-65 inch displays.
- VESA 100x100mm to 400x400mm covers most monitors and TVs in this size class, including many curved models.
- Single-stud or solid-wall fixing, useful in fit-outs where only one stud is available at the required height.
- Cable clips along the arm keep signal and power leads managed through the full range of travel.
- Pre-installed direction indicator and detachable panel reduce alignment time during installation.
Technical Specifications
| Model | VS02E-443 |
| Type | Full-motion articulating TV wall mount |
| Screen size range | 23" to 65" |
| Weight capacity | Up to 30 kg |
| VESA compatibility | 100x100mm to 400x400mm |
| Tilt range | Plus 3 to minus 10 degrees |
| Swivel range | Plus 90 to minus 90 degrees |
| Extension range | 60mm folded to 382mm extended |
| Material | Powder-coated steel |
| Mounting | Single stud or solid wall |
| Cable management | Cable clips along the arm |
| Testing | Strength tested to 3x rated load |
| In the box | Full-motion arm, wall plate, mounting hardware bag, direction indicator, installation guide |
Ideal for: huddle rooms and small meeting rooms, reception and service counters, hotel guest rooms, clinic consultation rooms, staff rooms and break areas, and residential bedrooms and living rooms across Dubai, Abu Dhabi, Sharjah and the wider GCC.
| Name | VSYS VS02E-443 Economical Full-Motion TV Wall Mount for 23"–65" Displays, 30 kg |
| Mounting Type | Wall mount, single stud or solid wall |
| Screen Size Support | 23 to 65 inch flat and curved TVs and monitors |
| Wall Mount Type | Full motion articulating arm |
| Product Type | Full-motion articulating TV wall mount |
| Screen Size Range | 23 to 65 inches |
| Load Capacity | Up to 30 kg |
| VESA Compatibility | 100x100mm to 400x400mm |
| Movement | Full motion, tilt and swivel on a folding extension arm |
| Tilt | Plus 3 to minus 10 degrees |
| Swivel | Plus 90 to minus 90 degrees |
| Extension Range | 60mm folded to 382mm extended |
| Wall Clearance | 60mm folded, 382mm at full extension |
| Material and Finish | Powder-coated steel |
| Available Finishes | Powder-coated |
| Mounting Interface | VESA 100x100mm to 400x400mm |
| Cable Management | Cable clips along the arm |
| Testing and Certification | Strength tested to 3 times rated load |
| In the Box | Full-motion arm, wall plate, mounting hardware bag, direction indicator, installation guide |
| MPN | VS02E-443 |
| Model | VS02E-443 |
No datasheet available.
Frequently Asked Questions
Where can I buy the VSYS VS02E-443 in the UAE?
Procure.ae supplies the VSYS VS02E-443 across the UAE, with delivery to Dubai, Abu Dhabi, Sharjah and the wider GCC and procurement-ready quotations for project quantities.
How far does the arm move?
It folds to 60mm from the wall and extends to 382mm. At full extension the screen swivels up to 90 degrees left or right and tilts from plus 3 to minus 10 degrees.
Can it be fixed to a single stud?
Yes. The wall plate is sized for a single stud or a solid wall, which is why this model works in partition walls where a wide dual-stud plate will not line up with the intended screen position.
What is the weight limit, and how was it tested?
30 kg. The bracket is strength-tested to three times that figure. Check the display weight on the manufacturer's specification sheet, since panel weights vary considerably even within the same screen size.
Will the cables be damaged when the arm moves?
Clips along the arm hold the HDMI and power leads to the structure so they travel with it. Leave a service loop at the wall plate when routing, and the cabling will follow the full range of motion without strain.
Request a quote: WhatsApp wa.me/97145465041 or email info@procure.ae.