CrownAudio EquipmentSKU DCi 4|300DA
Crown DCi 4|300DA Four-Channel Power Amplifier - Networked Audio
The Crown DCi 4|300DA is a four-channel power amplifier from the DriveCore Install DA Series, designed for professional audio installations. It delivers 300 watts per channel at 4 ohms and supports Dante and AES67 networked audio protocols. Procure.ae supplies this unit across the UAE.
This four-channel amplifier provides 300W output at 4Ω with ±0.25dB frequency response from 20Hz to 20kHz. It features THD of 0.35% and a damping factor greater than 1000 between 20Hz and 100Hz. The device supports 2, 4, 8, or 16 ohm loads alongside 70V and 100V speaker lines.
Network control is managed via HiQnet over TCP/IP with programmable GPIO. DSP functions include LevelMAX limiters, EQ, crossover, delay, and matrix routing. JBL speaker tunings are included for monitoring. The unit measures 483 x 89 x 362 mm and weighs 9.12 kg.
Type
Four-channel power amplifier
Weight
9.12 kg (20.1 lbs)
- Power Output Specs
- Network Audio Support
- DSP Capabilities
Delivery across UAE & GCCDubai, Abu Dhabi, Sharjah & beyond
Manufacturer warrantyBacked by the brand
InstallationArranged on request
Key features
01
Power Output Specs
Delivers 300W per channel at 4Ω with frequency response of ±0.25dB from 20Hz to 20kHz.
02
Network Audio Support
Features integrated Dante and AES67 support for networked audio distribution and control via HiQnet over TCP/IP.
03
DSP Capabilities
Includes DSP functions such as LevelMAX limiters, EQ, crossover, delay, matrix routing, and JBL speaker tunings.
04
Speaker Load Compatibility
Compatible with 2, 4, 8, and 16 ohm loads, as well as 70V and 100V constant voltage speaker systems.
05
Physical Dimensions
The chassis measures 483 x 89 x 362 mm with a weight of 9.12 kg for standard rack installation.
Specifications
13 specificationsGeneral
ModelDCi 4|300DA
TypeFour-channel power amplifier
Performance
Duty Cycle>1000 damping factor (20Hz-100Hz)
Audio
Channels4
Frequency Response±0.25dB (8Ω, 20Hz-20kHz)
Impedance2Ω-16Ω; 70Vrms/100Vrms (Stereo/Dual); 4Ω-16Ω; 140Vrms/200Vrms (Bridge Mono)
Power Output300W @ 4Ω (per channel)
THD0.35% at full rated power
Connectivity
ConnectivityDante™, AES67, HiQnet over TCP/IP
Connector Type15A IEC power connector
Input Voltage100V-240V ~ 50/60Hz
Physical
Dimensions483 mm x 89 mm x 362 mm (19 in x 3.5 in x 14.25 in)
Weight9.12 kg (20.1 lbs)
Questions
Can’t find your answer? Ask on WhatsApp
Does the Crown DCi 4|300DA support Dante?
Yes. The amplifier includes integrated Dante and AES67 protocols for networked audio control and monitoring via HiQnet.
What is the power output per channel?
It delivers 300 watts per channel at a 4 ohm load. It also supports speaker loads of 2, 8, or 16 ohms.
Does it include DSP features?
Yes. Built-in DSP includes limiters, EQ, crossover, delay, matrix routing, and JBL speaker tunings for optimized performance.
Can I buy the Crown DCi 4|300DA in the UAE?
Request a quote via WhatsApp +971 4 546 5041 or email info@procure.ae.
