Angekis Firmware Upgrade Tools for ARM and ISP Upgrades

The Angekis Firmware Upgrade Tools are an ARM upgrade utility and written instructions for updating Angekis camera firmware. They cover web-based ARM upgrades, dial-code ARM upgrades over an RS232 cable, and ISP upgrades for Blade and Saber models. Procure.ae supplies the tools across the UAE.

The tools include an ARM upgrade utility in old and new versions. The dial-code method uses the camera's dial-code switches and an RS232 cable, sets the COM port and 115200 baud in the ARM tool, and flashes a .hex ARM file to the camera. The web method uploads a .bin ARM file through the camera's browser-based Settings page, and the camera restarts when the upgrade completes. The ISP method sends a .bin image with the XMODEM 1KCRC protocol over the same serial link.

Use these tools when Angekis cameras need firmware updates, because the correct method depends on the camera's connections and firmware type. The ISP steps warn that the camera must not be powered off or disconnected during the transfer. After any upgrade, check the ARM version in the system information bar by pressing MENU and then INFO on the remote control. The tools and instructions are published on the Resource Downloads page.