NEC MultiSync 43-inch 4K PCAP Interactive Flat Panel – M431 PCAP — specification sheet
Procure
Product specification sheet procure.ae · +971 4 546 5041
NEC · M431 PCAP · Interactive Flat Panel

NEC MultiSync 43-inch 4K PCAP Interactive Flat Panel – M431 PCAP

NEC MultiSync 43-inch 4K PCAP Interactive Flat Panel – M431 PCAP

The NEC MultiSync M431 PCAP is a 43-inch 4K UHD interactive flat panel with projected capacitive (PCAP) touch for up to 20 simultaneous touches from a finger or passive stylus. It has an edge-to-edge flush front, 500 nits brightness and 24/7 rated operation. Procure.ae supplies it in the UAE.

The M431 PCAP has a 43-inch IPS panel with edge LED backlighting at a native 3840 x 2160 resolution, 500 nits brightness measured without glass, a default contrast ratio above 8,000:1 and 178° viewing angles. The panel refresh rate is 60 Hz with an 8 ms response time and 10-bit colour depth. PCAP touch supports up to 20 touches with a finger or conductive passive stylus, with ±1.5 mm accuracy and a 6H hardness surface. The flush edge-to-edge front has no bezel and is rated IP5x at the front.

The touch layer works with Android, Linux, Raspberry Pi and Windows over USB-HID. Inputs are two HDMI and one DisplayPort, and the display accepts Intel Smart Display Modules (up to 45 W) and a Raspberry Pi Compute Module 4. PiP and PbP modes include triple-split and quad-split layouts. Control options include PJLink, SNMP, HDMI CEC, Crestron Connected and AMX NetLinx, with NaViSet Administrator 2 for remote management. It mounts on a 300 x 300 mm VESA pattern.

Screen Size
43 inch
Resolution
3840 x 2160 (4K UHD)
Brightness
500 nits (without glass)
Touch Technology
PCAP
Type
Interactive Flat Panel
Weight
24.8 kg

Key features

01
PCAP Touch
Projected capacitive touch registers up to 20 simultaneous touches from a finger or conductive passive stylus.
02
4K UHD Panel
The 43-inch IPS panel runs at 3840 x 2160, 60 Hz, with 500 nits and a default contrast above 8,000:1.
03
Flush Front
The edge-to-edge flush design has no bezel, a 6H hardness surface and IP5x front protection.
04
Module Expansion
An Intel Smart Display Module slot (up to 45 W) and a Raspberry Pi Compute Module 4 slot add a built-in computer.
05
Video Inputs
Inputs are 2 x HDMI and 1 x DisplayPort, all with HDCP, plus a 3.5 mm audio output.
06
Control Protocols
PJLink, SNMP, HDMI CEC, Crestron Connected, AMX NetLinx and ASCII commands are supported.
07
Remote Management
Automated email alerts and NaViSet Administrator 2 support remote monitoring and management.
08
24/7 Operation
The display is rated for 24/7 use and lists EnergyStar 8.0.

Specifications

General
CompatibilityAndroid, Linux, Raspberry Pi, Windows. Touch via finger or conductive passive stylus over USB-HID; Windows Ink not supported
Key FeaturesPCAP touch, 20 touches, finger and passive stylus input, 500 nits, 24/7 operation, flush edge-to-edge front, Intel SDM and Raspberry Pi CM4 slots, NaViSet Administrator 2 management
ModelM431 PCAP
TypeInteractive Flat Panel
What's in the BoxDisplay, HDMI cable, USB cable, power cable, remote control with 2 x AAA batteries, setup manual
Display
Aspect Ratio16:9
BacklightEdge LED backlight
Bezel SizeEdge-to-edge flush design (no bezel)
Brightness500 nits (without glass)
Color Depth10-bit
Contrast Ratio8,000:1 (default)
OrientationLandscape, portrait, face-up
Panel TechnologyIPS
Refresh Rate60 Hz
Resolution3840 x 2160 (4K UHD)
Response Time8 ms
Screen Size43 inch
Touch Accuracy±1.5 mm
Touch Points20-point multi-touch
Touch TechnologyPCAP
Viewing Angle178° horizontal / 178° vertical
Performance
Storage Conditions-20 to 60 °C, 10% to 90% RH
Audio
Audio InDigital audio via HDMI and DisplayPort
Audio Out3.5 mm jack × 1
DisplayPortDisplayPort In × 1 (HDCP)
Speaker Output10 W + 10 W (integrated)
Connectivity
EthernetLAN 100 Mbit × 1
ExpansionIntel Smart Display Module (SDM) slot, Large and Small, up to 45 W; Raspberry Pi Compute Module 4 slot
HDMI InputsHDMI In × 2 (HDCP)
Input Voltage100–240 V AC, 50/60 Hz
ProtocolsAMX NetLinx, ASCII commands, Crestron Connected, HDMI CEC, HTTP browser, PJLink, SNMP
Serial PortRS-232C × 1
USB PortsUSB 2.0 (MediaPlayer) × 1
Power
Power Consumption80 W (shipment setting)
Standby Power< 0.5 W; < 2 W (networked standby)
Physical
Dimensions1003.4 x 595.1 x 74.42 mm
Duty Cycle24/7
Operating Humidity20% to 80% RH
Operating Temperature0 to 35 °C
Shipping Dimensions1120 x 700 x 203 mm
Shipping Weight30 kg
Surface Protection6H surface hardness
VESA Mount300 x 300 mm (M6, FDMI)
Weight24.8 kg
Compliance
CertificationsCE, EAC, RoHS, ENERGY STAR 8.0
IP RatingIP5x (front), IP2x (back)
Warranty3 years including backlight
QR code to NEC MultiSync 43-inch 4K PCAP Interactive Flat Panel – M431 PCAP on procure.ae
Get our best price for this product
Scan to open it on procure.ae, or contact the Procure sales team:
☎ +971 4 546 5041  ·  WhatsApp  ·  ✉ info@procure.ae  ·  🔗 View product page

This sheet is compiled from the product data held on procure.ae. For fully accurate and up-to-date figures, always refer to the manufacturer’s own specification sheet or datasheet for this model.

Specifications are provided by the manufacturer and may change without notice.

Pricing is quote-based. Contact Procure for current pricing and availability.

Delivery across the UAE and beyond, installation on request and manufacturer-backed warranty.

© Procure FZE. All rights reserved.