{"product_id":"nec-multisync-43-inch-4k-pcap-interactive-flat-panel-m431-pcap","title":"NEC MultiSync 43-inch 4K PCAP Interactive Flat Panel – M431 PCAP","description":"\u003cp\u003e\u003cstrong\u003eThe NEC MultiSync M431 PCAP is a 43-inch 4K UHD interactive flat panel with projected capacitive (PCAP) touch for up to 20 simultaneous touches from a finger or passive stylus. It has an edge-to-edge flush front, 500 nits brightness and 24\/7 rated operation. Procure.ae supplies it in the UAE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe M431 PCAP has a 43-inch IPS panel with edge LED backlighting at a native 3840 x 2160 resolution, 500 nits brightness measured without glass, a default contrast ratio above 8,000:1 and 178° viewing angles. The panel refresh rate is 60 Hz with an 8 ms response time and 10-bit colour depth. PCAP touch supports up to 20 touches with a finger or conductive passive stylus, with ±1.5 mm accuracy and a 6H hardness surface. The flush edge-to-edge front has no bezel and is rated IP5x at the front.\u003c\/p\u003e\n\u003cp\u003eThe touch layer works with Android, Linux, Raspberry Pi and Windows over USB-HID. Inputs are two HDMI and one DisplayPort, and the display accepts Intel Smart Display Modules (up to 45 W) and a Raspberry Pi Compute Module 4. PiP and PbP modes include triple-split and quad-split layouts. Control options include PJLink, SNMP, HDMI CEC, Crestron Connected and AMX NetLinx, with NaViSet Administrator 2 for remote management. It mounts on a 300 x 300 mm VESA pattern.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePCAP Touch - Projected capacitive touch registers up to 20 simultaneous touches from a finger or conductive passive stylus.\u003c\/li\u003e\n\u003cli\u003e4K UHD Panel - The 43-inch IPS panel runs at 3840 x 2160, 60 Hz, with 500 nits and a default contrast above 8,000:1.\u003c\/li\u003e\n\u003cli\u003eFlush Front - The edge-to-edge flush design has no bezel, a 6H hardness surface and IP5x front protection.\u003c\/li\u003e\n\u003cli\u003eModule Expansion - An Intel Smart Display Module slot (up to 45 W) and a Raspberry Pi Compute Module 4 slot add a built-in computer.\u003c\/li\u003e\n\u003cli\u003eVideo Inputs - Inputs are 2 x HDMI and 1 x DisplayPort, all with HDCP, plus a 3.5 mm audio output.\u003c\/li\u003e\n\u003cli\u003eControl Protocols - PJLink, SNMP, HDMI CEC, Crestron Connected, AMX NetLinx and ASCII commands are supported.\u003c\/li\u003e\n\u003cli\u003eRemote Management - Automated email alerts and NaViSet Administrator 2 support remote monitoring and management.\u003c\/li\u003e\n\u003cli\u003e24\/7 Operation - The display is rated for 24\/7 use and lists EnergyStar 8.0.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal for:\u003c\/strong\u003e meeting rooms, conference rooms, retail and hospitality kiosks, wayfinding points, reception areas and classrooms, across Dubai, Abu Dhabi, Sharjah and the wider GCC.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat touch technology does the NEC M431 PCAP use?\u003c\/h3\u003e\u003cp\u003eThe M431 PCAP uses projected capacitive (PCAP) touch. It supports up to 20 simultaneous touches with a finger or conductive passive stylus, with accuracy of ±1.5 mm. The surface has a 6H hardness rating. Windows Ink and palm rejection are not supported.\u003c\/p\u003e\n\u003ch3\u003eWhat resolution and brightness does the M431 PCAP have?\u003c\/h3\u003e\u003cp\u003eThe M431 PCAP has a native 3840 x 2160 (4K UHD) resolution on a 43-inch IPS panel at 60 Hz. Brightness is 500 nits, measured without glass, with a default contrast ratio above 8,000:1 and 178° horizontal and vertical viewing angles.\u003c\/p\u003e\n\u003ch3\u003eWhich operating systems work with M431 PCAP touch?\u003c\/h3\u003e\u003cp\u003eYes, the touch layer connects over USB-HID and the manufacturer lists Android, Linux, Raspberry Pi and Windows as supported operating systems. Windows Ink is not supported. A host computer or an installed module supplies the operating system and content.\u003c\/p\u003e\n\u003ch3\u003eCan I add a computer to the M431 PCAP?\u003c\/h3\u003e\u003cp\u003eYes. The M431 PCAP accepts Intel Smart Display Modules, Large and Small, up to 45 W, and a Raspberry Pi Compute Module 4. It also has two HDMI inputs and one DisplayPort input for an external PC, media player or conferencing system.\u003c\/p\u003e\n\u003ch3\u003eHow is the M431 PCAP mounted and how heavy is it?\u003c\/h3\u003e\u003cp\u003eThe M431 PCAP measures 1003.4 x 595.1 x 74.42 mm and weighs 24.8 kg. It has a 4-hole VESA pattern of 300 x 300 mm with M6 screws and a flush edge-to-edge front. Use a wall mount or trolley rated for this weight, such as the options NEC lists.\u003c\/p\u003e\n\u003ch3\u003eCan I buy the M431 PCAP in the UAE?\u003c\/h3\u003e\u003cp\u003eThe NEC MultiSync M431 PCAP is listed as discontinued by the manufacturer. Procure.ae can confirm current availability or recommend the current successor model, and supplies NEC displays with delivery and installation across the UAE and MEA. Request a quote by WhatsApp on +971 4 546 5041 or at info@procure.ae.\u003c\/p\u003e\n\u003cp\u003eRequest a quote via WhatsApp \u003ca href=\"https:\/\/wa.me\/97145465041\"\u003e+971 4 546 5041\u003c\/a\u003e or email \u003ca href=\"mailto:info@procure.ae\"\u003einfo@procure.ae\u003c\/a\u003e.\u003c\/p\u003e","brand":"NEC","offers":[{"title":"Default Title","offer_id":49043973668982,"sku":"M431 PCAP","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9006\/2710\/files\/m431_1_beeb66d0-21f2-4038-9950-e2e3620768e5.jpg?v=1745913935","url":"https:\/\/procure.ae\/products\/nec-multisync-43-inch-4k-pcap-interactive-flat-panel-m431-pcap","provider":"Procure FZE","version":"1.0","type":"link"}