{"product_id":"logitech-lorawan-gateway-for-logitech-spot-sensors-950-000124","title":"Logitech LoRaWAN Gateway for Logitech Spot Sensors – 950-000124","description":"\u003cp\u003e\u003cstrong\u003eThe Logitech LoRaWAN Gateway for Logitech Spot (950-000124) connects Logitech Spot room sensors to the network, so hundreds of sensors can report across an office. It supports Wi-Fi 2.4 GHz and Ethernet backhaul, uses a 3 dBi swivel LoRa antenna and works only with Logitech Spot sensors. Procure.ae supplies it across the UAE.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe gateway receives LoRaWAN signals from Logitech Spot sensors through a swivel LoRa antenna rated at 3 dBi peak gain, connected by SMA or RP-SMA. Its receiver sensitivity is -141 dBm at SF12, and transmit power is configurable from 5 dBm to 27 dBm. Backhaul uses Wi-Fi 2.4 GHz or Ethernet (RJ45, 10\/100 Mbps). The unit runs an ARM Cortex-A9 processor with 256 MB DDR RAM and 8 GB eMMC storage, and its casing is rated IP30. It is powered by a 230 V AC to 12 V DC adapter.\u003c\/p\u003e\n\u003cp\u003eUse it in areas without a Logitech CollabOS device, such as Tap Scheduler or Rally Bar, to connect Spot sensors throughout an office. The gateway is configured through its USB Type-A port, and the manufacturer notes that firmware is required for configuration and management, available at hub.sync.logitech.com\/logitech-spot. Security options include SecureBoot, SecureStorage, mTLS protection and SafeReboot. It mounts on a wall using two oblong holes or sits flat on a table on four domes. It works only with Logitech Spot sensors.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSensor coverage - Connects hundreds of Logitech Spot sensors throughout an office.\u003c\/li\u003e\n\u003cli\u003eLoRa antenna - Swivel LoRa antenna with 3 dBi peak gain and SMA or RP-SMA connector.\u003c\/li\u003e\n\u003cli\u003eDual backhaul - Wi-Fi 2.4 GHz and Ethernet (RJ45, 10\/100 Mbps) connectivity.\u003c\/li\u003e\n\u003cli\u003eReceiver sensitivity - -141 dBm at SF12, with configurable TX power from 5 dBm to 27 dBm.\u003c\/li\u003e\n\u003cli\u003eSecurity - SecureBoot, SecureStorage, mTLS protection and SafeReboot.\u003c\/li\u003e\n\u003cli\u003eStatus LEDs - Programmable LEDs show power, backhaul and LoRa RF activity.\u003c\/li\u003e\n\u003cli\u003eConfiguration port - USB Type-A port for configuration, with firmware required for management.\u003c\/li\u003e\n\u003cli\u003eFlexible mounting - Wall mount with two oblong holes, or table placement on four domes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal for:\u003c\/strong\u003e office floors, workplace sensor deployments, and meeting areas without Tap Scheduler or Rally Bar devices, across Dubai, Abu Dhabi, Sharjah and the wider GCC.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhich sensors does the LoRaWAN Gateway for Logitech Spot work with?\u003c\/h3\u003e\u003cp\u003eIt works only with Logitech Spot sensors. Its swivel LoRa antenna with 3 dBi peak gain receives their signals, and the gateway connects to the network over Wi-Fi 2.4 GHz or Ethernet.\u003c\/p\u003e\n\u003ch3\u003eHow many Logitech Spot sensors can one gateway connect?\u003c\/h3\u003e\u003cp\u003eThe manufacturer describes connecting hundreds of Logitech Spot sensors throughout an office. The manufacturer's specifications do not state a maximum sensor count per gateway, so confirm the layout with Procure.ae before deployment.\u003c\/p\u003e\n\u003ch3\u003eDoes the gateway need configuration before use?\u003c\/h3\u003e\u003cp\u003eYes. The gateway needs firmware for configuration and management, available at hub.sync.logitech.com\/logitech-spot. Configuration is done through its USB Type-A port. Procure.ae can confirm the firmware and setup steps before delivery.\u003c\/p\u003e\n\u003ch3\u003eHow is the gateway mounted?\u003c\/h3\u003e\u003cp\u003eIt mounts on a wall using two oblong holes, or it can sit flat on a table on four domes. Its casing is rated IP30, and it is powered by a 230 V AC to 12 V DC adapter with a 2.5 mm \/ 5.5 mm jack connector.\u003c\/p\u003e\n\u003ch3\u003eCan I buy the 950-000124 in the UAE?\u003c\/h3\u003e\u003cp\u003eYes. Procure.ae supplies the Logitech LoRaWAN Gateway for Logitech Spot across the UAE, with delivery and installation. Request a quote on WhatsApp at +971 4 546 5041 or at info@procure.ae.\u003c\/p\u003e\n\u003cp\u003eRequest a quote via WhatsApp \u003ca href=\"https:\/\/wa.me\/97145465041\"\u003e+971 4 546 5041\u003c\/a\u003e or email \u003ca href=\"mailto:info@procure.ae\"\u003einfo@procure.ae\u003c\/a\u003e.\u003c\/p\u003e","brand":"Logitech","offers":[{"title":"Default Title","offer_id":49020306522230,"sku":"LoRaWAN Gateway for Logitech Spot","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/9006\/2710\/files\/lorawan-gateway-01.png?v=1792013293","url":"https:\/\/procure.ae\/products\/logitech-lorawan-gateway-for-logitech-spot-sensors-950-000124","provider":"Procure FZE","version":"1.0","type":"link"}