InFocus Electric Height-Adjustable Wall Mount – INF-MOTWALL

The InFocus INF-MOTWALL (also referenced as XSD1U) is an electric height-adjustable wall mount for displays up to 100 inches wide. It supports up to 140.6 kg (310 lbs), comes with a control pad and a Bluetooth remote, and runs from 100–240 V AC at 450 W. Procure.ae can quote it and confirm availability in the UAE.

The mount lifts the display between its lowest and highest positions from a control pad with UP, DOWN, PRESETS and SAVE buttons. A Bluetooth remote and USB dongle are listed in the parts. During installation the lift is initialised by holding DOWN for three seconds. The package lists a wall plate, the lift assembly, a concrete mounting kit, a toggler mounting kit, cable ties and a display interface kit. The duty cycle is intermittent: 10%, with a maximum of 2 minutes on and 18 minutes off.

The guide lists these walls: bare concrete at least 8 inches thick, 8 x 8 x 16 inch concrete block, wood studs 16 or 24 inches on centre with up to 5/8 inch drywall, 2 x 4 inch 25-gauge steel studs, and plywood-backed steel stud walls. On steel studs the weight limit drops to 290 lbs (131.5 kg). The display should be at least 29 3/8 inches (about 746 mm) tall to avoid pinch points while the height changes.