Extron NetPA U 2004 FX Network Power Amplifier — specification sheet
Procure
Product specification sheet procure.ae · +971 4 546 5041
Extron · NetPA U 2004 FX · Amplifiers

Extron NetPA U 2004 FX Network Power Amplifier

The Extron NetPA U 2004 FX is a four-channel network power amplifier designed for decentralized audio systems. It features Dante-enabled networking with AES67 support and delivers 200 watts per channel into standard loads. Procure.ae supplies this equipment across the UAE.

This unit provides 200 watts per channel with two adjacent channels sharing up to 400W each when needed. It achieves standby-to-full-power startup in under 50 milliseconds via InstaWake technology. The device maintains a signal-to-noise ratio of 100 dB for both line and digital inputs, ensuring high-fidelity audio performance throughout the system.

The NetPA U 2004 FX supports 8 ohm, 4 ohm, 70V, and 100V speaker loads through secure screw-lock connectors. Integrated DSP allows for decentralized control with volume adjustment in 0.1 dB steps from -100 dB to 0 dB. Procure.ae offers bulk project quotations and installation services for this 1U rack-mountable amplifier across the UAE.

Type
four channel Dante-enabled power amplifier

Key features

01
Network Audio Integration
Features Dante-enabled networking with AES67 support and scalable audio transport capabilities.
02
Power Output Specifications
Delivers 200 watts per channel standard, with adjacent channels sharing up to 400W each.
03
Rapid Startup Performance
Reaches full power in under 50 milliseconds from standby using InstaWake technology for immediate availability.
04
Audio Signal Quality
Maintains a signal-to-noise ratio of 100 dB and total harmonic distortion below 0.01% through DSP.
05
Flexible Input Connectivity
Includes four mono balanced or unbalanced line inputs via 3.5 mm captive screw connectors with adjustable nominal levels.

Specifications

General
ModelNetPA U 2004 FX
Typefour channel Dante-enabled power amplifier
Audio
Audio24-bit uncompressed audio at 48 kHz sampling rate
Audio In4 mono balanced/unbalanced line inputs via 3.5 mm connectors
Audio Out4 mono balanced/unbalanced line outputs via 3.5 mm connectors
Channels4 channels amplifier; 8 Rx inputs, 8 Tx outputs via AT ports
Crossover FrequencyN/A (amplifier with DSP)
Dynamic Range100 dB line in to line/speaker out; 105 dB digital in to line out
Frequency Response20 Hz to 20 kHz at maximum output (unweighted)
Impedance8 ohms, 4 ohms, 70V, or 100V loads supported
Power Output200W per channel; up to 400W shared between adjacent channels
Speaker Output4 channels via 2-pole 5 mm screw lock captive screw connectors
THD<0.01% through DSP; 0.2% through amplifier @ 1 kHz
Connectivity
ConnectivityDante and AES67 network audio transport via standard Internet protocols
Data Rate1 Gbps switch connectivity
Ports2 RJ-45 ports, 2-port 1 Gbps switch for Dante interface
ProtocolsDante, AES67, standard Internet protocols for LAN transport
Power
Standby PowerInstaWake standby to full power under 50 milliseconds
Physical
MountingFront and rear rack mount hardware included
Rack Units1U enclosure height
QR code to Extron NetPA U 2004 FX Network Power Amplifier on procure.ae
Get our best price for this product
Scan to open it on procure.ae, or contact the Procure sales team:
☎ +971 4 546 5041  ·  WhatsApp  ·  ✉ info@procure.ae  ·  🔗 View product page

This sheet is compiled from the product data held on procure.ae. For fully accurate and up-to-date figures, always refer to the manufacturer’s own specification sheet or datasheet for this model.

Specifications are provided by the manufacturer and may change without notice.

Pricing is quote-based. Contact Procure for current pricing and availability.

Delivery across the UAE and beyond, installation on request and manufacturer-backed warranty.

© Procure FZE. All rights reserved.