OVERVIEW 

The Extron DTP DVI 4K 230 D Rx is a decorator-style receiver that works with Extron DTP^®‑enabled products to send DVI-D video, audio, and bidirectional RS‑232 and IR signals up to 230 feet (70 meters) over a shielded CATx cable. It provides an economical and effective means for extending single link DVI‑D or HDMI signals. In addition, the DTP DVI 4K 230 D Rx accepts analog stereo audio signals from a DTP‑enabled product over the same shielded twisted pair cable. It supports video signals at resolutions up to 4K. The wall-mountable design and remote power capability of the DTP DVI 4K 230 D Rx provide the convenience of placing output connections precisely where they are needed.

The DTP DVI 4K 230 D Rx enables the reliable transmission of DVI‑D signals, and is fully compatible with HDMI signals when used with the appropriate DVI‑HDMI adapters from Extron. The twisted pair receiver can extend HDMI signals, supporting Deep Color up to 12-bit, and embedded HD lossless audio formats. In addition, DDC communication of EDID and HDCP is continuously maintained between a source and display, ensuring direct compatibility and optimal signal transmission between devices. The DTP DVI 4K 230 D Rx also receives stereo analog audio from a DTP‑enabled matrix switcher, switcher, or signal processor. The analog stereo audio signal is sent over the same shielded twisted pair cable as the DVI‑D and control signals, eliminating the need for a separate cable run to support analog audio at the receiver.

The twisted pair receiver provides other convenient, integrator-friendly features designed to help simplify installation. The DTP DVI 4K 230 D Rx supports simultaneous transmission of bidirectional RS‑232 and IR signals from a control system for AV device control. Also, the receiver can be remotely powered over the shielded twisted pair cable by a DTP‑enabled product, allowing both devices to share one power supply.

The DTP DVI 4K 230 D Rx can be integrated with an Extron DTP CrossPoint^® Presentation Matrix Switcher, or other DTP‑enabled products to support displays and other output devices at remote locations. The receiver mounts in an included two‑gang decorator-style wallplate. The wall-mountable form factor of the DTP DVI 4K 230 D Rx allows for discreet placement in walls, lecterns, floor boxes, and behind flat-panel displays.

Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ‑45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron DTP Series products. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.

Features

• Receives single link DVI-D plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable — The DTP DVI 4K 230 D Rx provides high reliability and maximum performance on an economical and easily installed cable infrastructure.
• Input: One DTP^® 230 twisted pair input on RJ-45
• Outputs: One DVI-D, one 3.5 mm stereo mini jack for audio
• Supports computer and video resolutions up to 4K — Supports 4K/60 4:2:0 and 4K/30 4:4:4, maintaining superior image quality at the highest resolutions. Pixel clocks above 165 MHz are supported in HDMI format.
• Supported HDMI specification features include data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats
• HDCP 2.3 compliant — Ensures display of content-protected 4K video media and maintains interoperability with earlier versions of HDCP.
• Remote power capability — For simplified installation, the receiver can be remotely powered by a DTP-enabled product over the twisted pair connection.
• Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
• Compatible with CATx shielded twisted pair cable — Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
• Accepts additional analog stereo audio signals — The DTP DVI 4K 230 D Rx accepts stereo analog audio from a DTP‑enabled product. Embedded digital audio is not de‑embedded from the digital video signal.
• Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.
• Supports EDID and HDCP transmission — DDC channels are actively buffered allowing continuous communication between source and display.
• Compatible with all DTP 230 Series transmitters and DTP-enabled products — Enables mixing and matching with desktop and wallplate transmitters, as well as other DTP-enabled products to meet application requirements.
• LED indicator for signal presence and power — Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.
• RJ-45 signal and link LED indicators for DTP port — Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
• Supports HDMI signals when used with optional Extron DVI-HDMI adapters
• JITC Certified — Successfully completed interoperability and information assurance testing for use in government applications and other mission-critical environments.
• Mounts in an included two-gang decorator-style wallplate — The two-gang decorator-style wallplate is available in black or white to blend in with a wide range of environments.
• Optional, external Extron Everlast™ power supply available, part #70-1174-01 — Provides worldwide power compatibility with high demonstrated reliability and low power consumption
• Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty

SPECIFICATION 

DTP DVI 4K 230 D Tx/Rx
specification
Frame rate1	24, 25, 30, 50, or 60 fps
Chroma sampling1	4:4:4, 4:2:2, or 4:2:0
Color bit depth1	8 bits per color
Signal Type	HDMI 1.4, HDCP 2.3
Max. video data rate	10.2 Gbps (3.4 Gbps per color)
NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to determine video parameters supported by this data rate.
Video
Maximum data rate	10.2 Gbps (3.4 Gbps per color)
Maximum pixel clock	300 MHz
Resolution range	Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling (*Reduced blanking)
Color bit depth	8, 10, or 12 bits — subject to the maximum data rate limit
Formats	RGB and YCbCr digital video
Standards	DVI 1.0, HDMI 1.4, HDCP 2.3
Video input and loop through — transmitter
Number/signal type	1 single link DVI-D (or HDMI*) input 1 single link DVI-D (or HDMI*) local loop-through
Connectors	2 female DVI-I
NOTE     *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
Interconnection between transmitter and receiver
Connectors	1 female RJ-45 per unit for 1 cable connecting the transmitter and receiver
Termination standards	TIA/EIA T568B
DTP signal
Signal transmission distance
1080p @ 60 Hz	Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
2560x1600 @ 60 Hz	Up to 130' (40 m) using STP cable or XTP DTP 24 cable
4K/UHD @ 30 and 60 Hz	Up to 130' (40 m) using STP cable or XTP DTP 24 cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth STP cable
NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Video output — receiver
Number/signal type	1 single link DVI-D (or HDMI*)
Connectors	1 female DVI-I
Audio
Gain	Unbalanced output: 0 dB
Frequency response	20 Hz to 20 kHz, ±1 dB
THD + Noise	0.03% @ 1 kHz at nominal level, 0.3% @ 20 kHz at nominal level
S/N	>90 dB, at maximum output (unweighted)
Stereo channel separation	>80 dB @ 1 kHz to 20 kHz
Audio input — transmitter
Number/signal type	1 PC level stereo, unbalanced
NOTE     Analog audio is not embedded onto the digital video signal. Embedded digital audio is not de-embedded from the digital video signal.
Connectors	(1) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (ground)
Impedance	20k ohms, DC coupled
Nominal level	-10 dBV (316 mVrms)
Maximum level	+6 dBu, unbalanced
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — receiver
Number/signal type	1 stereo (2 channel), unbalanced
Connectors	(1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
Impedance	50 ohms, unbalanced
Gain error	±0.2 dB channel to channel
Maximum level (600 ohm)	>+7 dBu, unbalanced at 1% THD+N
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port input
Transmitter	RS-232 via (1) 3.5 mm, 5 pole captive screw connector (connector is shared with IR control port)
Receiver	1 set of proprietary signals on a female RJ-45 jack
Serial control port output
Transmitter	1 set of proprietary signals on a female RJ-45 jack
Receiver	RS-232 via a 3.5 mm, 5 pole captive screw connector
NOTE     Protocol is mirrored between the transmitter and the receiver.
Baud rate and protocol	300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
Serial control pin configuration	Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd
IR control port	(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
IR control pin configuration	3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts
Power consumption
Transmitter
Device	3.3 watts
Device and power supply	4.6 watts
Remote power budget	12 watts
Receiver
Device	4.3 watts
Device and power supply	5.9 watts
Remote power budget	12 watts
NOTE     Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.
Ambient temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Thermal dissipation
Transmitter
Device	9.9 BTU/hr
Device and power supply	14.5 BTU/hr
Receiver
Device	13.3 BTU/hr
Device and power supply	19.0 BTU/hr
Mounting
Furniture or wall mount	Yes, with a 2-gang wall box or mud ring
Enclosure type	Metal
Enclosure dimensions
Faceplate	2.6" H x 2.6" W x 0.1" D (6.6 cm H x 6.6 cm W x 0.3 cm D) (Fits the opening in a 2-gang decorator wallplate.)
Device	2.8" H x 3.5" W x 1.7" D (7.1 cm H x 8.9 cm W x 4.3 cm D)
NOTE     Height excludes mounting tabs, depth excludes connectors.
Product weight	0.4 lbs (0.2 kg)
Regulatory compliance	c-UL, C-tick, CE**, FCC Class A**, ICES, KC, UL, VCCI
NOTE     **CE and FCC testing is conducted with STP cable.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(5455-D15)