DTP DVI 4K 330 Tx Long Distance DTP Transmitter for DVI
- Transmits single link DVI-D plus control and analog audio up to 330 feet (100 meters) over a shielded CATx cable
- Supports computer and video resolutions up to 4K
- Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
- Compatible with CATx shielded twisted pair cable
- Accepts additional analog stereo audio signals
- DVI input loop-through
OVERVIEW
The Extron DTP DVI 4K 330 Tx is a long distance transmitter for sending DVI‑D video, audio, and bidirectional RS‑232 and IR signals up to 330 feet (100 meters) over a shielded CATx cable to Extron DTP® 330-enabled products. It provides an effective means for extending single link DVI‑D or HDMI signals. In addition, the DTP DVI 4K 330 Tx accepts analog stereo audio signals for simultaneous transmission over the same shielded twisted pair cable. It supports video signals at resolutions up to 4K. The transmitter is equipped with a buffered DVI loop-through output to support a local computer monitor. The compact enclosure size and remote power capability make the DTP DVI 4K 330 Tx ideal for discreet placement in lecterns, beneath tables, or wherever needed to meet application requirements.
SPECIFICATION
DTP DVI 330 4K Tx/Rx | |||
specification | |||
---|---|---|---|
Frame rate1 | 24, 25, 30, 50, or 60 fps | ||
Chroma sampling1 | 4:4:4, 4:2:2, or 4:2:0 | ||
Color bit depth1 | 8 bits per color | ||
Signal Type | HDMI 1.4, HDCP 2.3 | ||
Max. video data rate | 10.2 Gbps (3.4 Gbps per color) | ||
|
|||
|
|||
|
|||
Video | |||
Maximum data rate | 10.2 Gbps (3.4 Gbps per color) | ||
Maximum pixel clock | 300 MHz | ||
Resolution range | Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling (* reduced blanking) |
||
Color bit depth | 8, 10, or 12 bits — subject to the maximum data rate limit | ||
Formats | RGB and YCbCr digital video | ||
Standards | DVI 1.0, HDMI 1.4, HDCP 2.3, CEA-861E | ||
Video input — transmitter | |||
Number/signal type | 1 single link DVI-D (or HDMI*) input 1 single link DVI-D (or HDMI*) local loop-through |
||
Connectors | 2 female DVI-I | ||
Interconnection between transmitter and receiver | |||
Connectors | 1 female RJ-45 per unit | ||
Termination standard | TIA/EIA T568B | ||
Signal transmission distance | |||
1080p @ 60 Hz | Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable | ||
2560x1600 @ 60 Hz | Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable | ||
4K/UHD @ 30Hz and 60 Hz | Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable | ||
Cable requirements | Solid conductor, 24 AWG or better | ||
Cable recommendations | 400 MHz bandwidth, STP (shielded twisted pair) | ||
|
|||
Video output — receiver | |||
Number/signal type | 1 single link DVI-D (or HDMI*) | ||
Connectors | 1 female DVI-I | ||
Audio | |||
Gain | Unbalanced output: 0 dB; balanced output +6 dB | ||
Frequency response | 20 Hz to 20 kHz, ±0.5 dB | ||
THD + Noise | 0.03% @ 20 Hz to 20 kHz at maximum output | ||
S/N | >90 dB, at maximum output (15 dBu), balanced (unweighted) | ||
Stereo channel separation | >80 dB @ 1 kHz to 20 kHz | ||
Audio input | |||
Number/signal type | 1 PC level stereo, unbalanced | ||
|
|||
Connectors | (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) | ||
Impedance | >10k ohms, DC coupled | ||
Nominal level | -10 dBV (316 mVrms) | ||
Maximum level | +6 dBV (unbalanced) | ||
|
|||
Audio output | |||
Number/signal type | 1 stereo (2 channel), balanced/unbalanced | ||
Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
Impedance | 50 ohms unbalanced, 100 ohms balanced | ||
Gain error | ±0.1 dB channel to channel | ||
Maximum level (600 ohm) | >+11 dBu, balanced | ||
Communications — external device (pass-through, unidirectional or bidirectional) | |||
Serial control port input/output | |||
Transmitter | RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port) | ||
Receiver | 1 set of proprietary signals on a female RJ-45 jack | ||
Serial control port output/input | |||
Transmitter | 1 set of proprietary signals on a female RJ-45 jack | ||
Receiver | RS-232 via a 3.5 mm, 3 pole captive screw connector | ||
Baud rate and protocol | 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity | ||
Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = Gnd | ||
IR control port | (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz |
||
IR control pin configuration | 3 = Gnd, 4 = IR Tx, 5 = IR Rx | ||
General | |||
Power supply | External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts |
||
Power consumption | |||
Transmitter | |||
Device | 3.4 watts | ||
Device and power supply | 4.8 watts | ||
Remote power budget | 12 watts | ||
Receiver | |||
Device | 4.2 watts | ||
Device and power supply | 5.8 watts | ||
Remote power budget | 12 watts | ||
|
|||
Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
||
Cooling | Convection, no vents | ||
Thermal dissipation | |||
Transmitter | |||
Device | 10.3 BTU/hr | ||
Device and power supply | 15.1 BTU/hr | ||
Receiver | |||
Device | 13.0 BTU/hr | ||
Device and power supply | 18.6 BTU/hr | ||
Mounting | |||
Rack mount | Yes, with optional 1U high rack shelf | ||
Furniture mount | Yes, with optional under-desk mounting kit | ||
Enclosure type | Metal | ||
Enclosure dimensions | |||
Transmitter | 1.0" H x 4.3" W x 3.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.) |
||
Receiver | 1.0" H x 4.3" W x 6.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.) |
||
Product weight | |||
Transmitter | 0.5 lbs (0.3 kg) | ||
Receiver | 1.0 lb (0.5 kg) | ||
Regulatory compliance | CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI, UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply. Complies with the appropriate requirements of RoHS, WEEE |
||
|
|||
Product warranty | 3 years parts and labor | ||
Everlast power supply warranty | 7 years parts and labor | ||
|
|||
|
|||
(5343-D14) |
Shipping Dimensions and Weights | ||||
---|---|---|---|---|
Part # | Height | Width | Depth | Weight |
60-1360-12 | 3.0" (7.6 cm) | 7.5" (19.1 cm) | 10.5" (26.7 cm) | 1.78 lbs (0.81 kg) |
Manufacturer | MISCELLANEOUS |
---|